Nick Heath

Forum Replies Created

Viewing 15 replies - 2,476 through 2,490 (of 4,427 total)
  • Author
    Replies
  • in reply to: Perimeter Deck Lines are in need of repair #19271
    Ted Lam

    Hi Carole,

    Just to add a touch,

    Please check with Coast outdoor if they have reflective deck line in, it is better to see your boat in the dark than the just black color. I checked with them twice in the winter but they ran out.

    If you need this idea, buy a few feet of black nylon tube, 5/16 diameter, i found it in Canadian tire, automobile section. Slide each chunks in to the rope where your self rescue hand can grap, usually 4 locations around cockpit, along the side of the boat.

    Last, if you don’t have help, use a small pair of vise grip, pull hard and clamp the rope (just use enough force so you don’t damage the rope) at the loop before the last loop so when you tight the end rope, it does not get too loose after all.

    Last, last, if you still need to show you, i can come, but it has to be the first week of May.

    PS. i have a same boat as you have, in white. It found me, i never know how good it was until i went all the way to Nanaimo to buy it. Love it very much like a trophy.

    in reply to: pitt lake and Coquitlam lake #19270
    Former Member

    Hi Sandra

    I have paddled Pitt lake a number of times and it’s a great place. As with any long lake it can have high winds which seems the normal. As well Pitt lake is one of the largest tidal lakes so current is present at the mouth of Pitt river

    Checked 2 weeks ago and the water was way down so tide makes a huge difference visiting the Marsh area. Compared to last year the water was so high it was amazing

    But my only warning is power boaters if you are not going into the marsh. I unfortunately have little respect for cabin owners and power boaters in that area. Had a very negative experience with power boaters stopping at landings to letting dogs pee and poop off leash. And having to chase dogs away from doing this on the corners of the tent just no morals.
    As well many of the marine parks are littered with trash from power boaters. But we did see a poor parks operator doing maintenance and cleaning up litter.

    But a amazing area if the water is really high and you can explore all of the marsh

     

     

    in reply to: pitt lake and Coquitlam lake #19269
    Clark Perry-Bater

    One more thing – I think Pitt Lake is subject to strong winds (like Indian Arm), due to topography and thermal circulation on a sunny day. Just a heads up.

    in reply to: pitt lake and Coquitlam lake #19268
    Clark Perry-Bater

    Hi Sandra, as far as I know, Coquitlam Lake, as part of the Greater Vancouver watershed, is off limits to paddlers or any other people.  I think there are locked gates, etc. barring access to the lake and surrounding hills. I’ve never paddled past the narrows at the south end of Pitt Lake, so I can’t help you there.   -Clark

    in reply to: General Discussion #19267
    Sandra Waddle

    Hi! I am thinking of doing a a 3 day kayak camping trip with a friend. We are looking at Pitt Lake as it looks like it is has campsites and may be a nice paddle. Has anyone done this trip?

    Also, does Coquitlam Lake have camping? It does not look like it from the marine trails website but thought I would check.

    Happy paddling,

    Sandra

    in reply to: SKABC WaterWalker Film Screening (Part 1). #19263
    Former Member

    Thanks for the responses everyone … Muchas Gracias 🙂

    in reply to: SKABC WaterWalker Film Screening (Part 1). #19260
    Clark Perry-Bater

    Nick, as a SKABC member, you should have received several emails in the last week giving instructions to login to see the films. If you are still having trouble getting the instructions, give me a call. (log in to find contact info for Clark – admin)

    in reply to: Mad Frog Lily Pad #19259
    Nancy More

    No idea about Mad Frog, but Seasucker sells rod holders and their suction system is great.

    Rod Holders

    I bought my roof rack from a bike shop out in the Valley, but if you can’t find a local supplier, they do on-line sales.

    in reply to: Perimeter Deck Lines are in need of repair #19243
    Former Member

    Hey Carole … I’ve replaced deck lines previously and its pretty easy.    First step is to draw out how the current lines are setup on your kayak (so that you know how to install the new line).  In particular note location and type of knots.  2nd step is to get some new line (your local kayak shop can probably sell you some).  3rd step is to install following the layout you drew from the original lines.   Couple of things to consider / you might need:

    I recommend looking online as well as there are a bunch of good resources about deck lines … e.g. https://paddling.com/learn/deck-lines-rigging .

    Finally, if this is not your thing I would recommend your local kayak shop and I am sure they can do the work for you … e.g.

    https://westerncanoekayak.com/ (Abbotsford)

    https://www.coastoutdoors.ca/ (North Van)

    in reply to: SKABC WaterWalker Film Screening (Part 1). #19251
    Admin S. Jensen

    Hi Nick, you need to be logged in to see the info as the event is for club members. Thanks!

    in reply to: General Discussion #19250
    Former Member

    Hi … I was wondering if anyone knows how to find the film festival info?   I checked the link on the SKABC site but it seems to go no where …

    Thanks

    in reply to: Perimeter Deck Lines are in need of repair #19249
    Mark Stoakes

    Take a photo of the deck and the old deck lines. Then when you snip the old ones off you can remember the pattern. Usually 4mm cord is used for deck lines

    in reply to: Mad Frog Lily Pad #19248
    Former Member
    in reply to: Mad Frog Lily Pad #19247
    Former Member

    couple threaded rubber feet on Amazon, not sure if homedepot or Lee valley might sell something

     

    in reply to: Mad Frog Lily Pad #19246
    Former Member

    I searched and doesn’t seem to be a very popular item.
    Just a random idea could you not make one from a ikea plastic cutting Board?
    add some straps and I see some rubber bumpers. I’m sure those could be sourced.

Viewing 15 replies - 2,476 through 2,490 (of 4,427 total)