Nick Heath

Forum Replies Created

Viewing 15 replies - 1,456 through 1,470 (of 4,451 total)
  • Author
    Replies
  • Kapila Jayaweera

    This is great idea Ted. I can come and help you as well with whatever paddles needs to learn (Assuming I know what I am doing).

    Also I can get some rolling practice as well at the same time.

    See you all next Saturday at 9am.

    in reply to: Kokatat wrist gasket tool repair kit #22975
    Kapila Jayaweera

    Thanks for everyone’s response to my posting. I kind of follow Vincent’s method. I managed to get a plastic cutting board (flexibles one) from dollar store for $2.50. Managed to cut 2″ strips (use two strips to make it stronger) then cut a piece of cardboard with the same diameter fit into wrist gasket and insert. Did one wrist, waiting to dry out now. Everything went well.

    Only complain is dealing with Aqua seal. Seems to stick to everything, not much pleasant. Has to do carefully without getting to everything. If you don’t want to deal with it, not a bad idea to let professionals deal with it.

    Last year I have to replace my neck gasket, it was bit of work. I gave it to Coast Outdoor and they did a great job. Also their turnaround time was great. I managed to drop off and pick up in two days.
    Also Skyview Outdoors repairing gaskets too.

    Thanks all,
    KapilaWrist Gasket replacement

    Connie Waddell

    I would be interested as well.

    Thank you.

    Connie

    Kathy Romses

    I’m interested!

    Thanks for offering this experience.

    Kathy

    in reply to: Kokatat wrist gasket tool repair kit #22972
    John Halliday

    My experience is that the replacement of wrist gaskets is simple enough when you have the Kokatat kit. PIKA owns the Kokatat wrist and the neck gasket replacement kits which are available for borrowing.

    in reply to: General Discussion #22971
    Ted Lam

    Hi Everyone,

    In helping each other with safety practice for the next season or still paddle in the Fall. I would like to start a pilot run this year of Wet exit, Re-entry and Assisted rescue in Sasamat lake. The idea is to help paddlers, who do not own dry suit, can work in the warm water (for the next season). Others with dry suit are also welcome.

    When: Saturday, August 5th 9:00 Am, on water.

    Where: Parking lot F (the last parking lot). Pay parking in effect, wheel cart needed.

    What to expect:

    Low and high brace,
    Draw strokes and techniques to move around and quickly approach swimmer’s boat.
    Basic wet exit, notifying others while in the water.
    Basic solo entries, with or without paddle float.
    Bow rescue.
    T-rescue,

    Using stirrup,

    Basic towing. Quick towing a paddler and boat out of danger.

    I know that many of you have years of paddling and trainings, but I believe that if the skills are not maintained, once an accident happens, we never know how to react, or with this practice we get in action quickly to help others on the trip.

    This is a practice session, not a clinic nor a course and I might learn something from you too.

    in reply to: Kokatat wrist gasket tool repair kit #22970
    Former Member

    Wow… you guys repair your own?…

    It’s a little far but kayak academy outside of Seattle does repairs:

    GASKET REPLACEMENT SERVICE, Kokatat WRIST ***EACH*** (parts & labor)

    in reply to: Kokatat wrist gasket tool repair kit #22969
    Vincent Law

    Hey Kapila, call mom. I couldn’t find them either last year so I made my own. You can borrow mine.

    in reply to: General Discussion #22968
    Kapila Jayaweera

    Anyone have wrist gasket repair tool kit that I can borrow? It is just two adjustable cylinders and two small pipes fits inside. I can’t seems to find locally to buy it.

    It is like this link below.

    https://coloradokayak.com/products/kokatat-ankle-wrist-gasket-tool-kit

    I was trying to use some other tools like water bottle or yogurt cup but bit harder to take it out once gasket dry out.

    I came across this good video explaining how to replace wrist gaskets if anyone else trying to do the same.

    https://www.google.com/search?q=https%3A%2F%2Fcolokokatat+wrist+gasket+repair&rlz=1C1GCEB_enCA892CA892&oq=https%3A%2F%2Fcolokokatat+wrist+gasket+repair&aqs=chrome..69i57j69i58.437767210j0j15&sourceid=chrome&ie=UTF-8#fpstate=ive&vld=cid:c3b68060,vid:2yaZf1eixmU

     

    Thank You,

    Kapila

    in reply to: Buy and Sell #22960
    Kevin Amos

    Greetings
    I trust everyone is enjoying the summer and the ocean.

    Mt self and my girlfriend,Judy, were members years ago,you couldn’t forget my blue chevy avalanche and my orange Gulfstream.

    Unfortunately, Judy passed away with lung cancer a few years back and I am happy to say I survived stage 3 esophagus cancer.

    Always dreamed of getting back into the sport but doubt I have the strength nor funds these days.
    The boat was built in the Sydney shop on the island before Current Design was sold maybe in 2005,the boat is in good shape and have all the Thule racks, saddle and rollers,
    Selling for $1800,the boat is in the lower mainland.

    An epic weekend explorer and quality build.
    Regards
    Steve

    steveaustin@shaw.ca

     

    Former Member

    Hope you guys enjoy it! I’ve been wanting to do this for some time! 🙂

    in reply to: General Discussion #22954
    Maureen Benzon

    On the water at 6.00 pm (parking dependant) so get there early if you can.

    Strathcona to Twin Islands and up to the narrows to check out the pictoglyphs.

    Approx. 8nm return with limited landings.

    Parking is not easy during spring break, but come prepared to hang out for a bit until someone leaves. Or carpool. Parkgate mall is an easy meet up place.

    Please let me know if you are coming so we can help unload.

    🙂

    in reply to: NDK Romany Surf kayak for sale #22952
    Former Member

    It’s a definitely a nice kayak. I’ve heard some good things about this design.

    in reply to: Buy and Sell #22951
    Kevin Amos

    Hi
    I am not a member of SKABC (although I was in the 1980s and 1990s) and have what may be an inappropriate request. I have a very nice NDK Romany Surf kayak for sale and was thinking it may be of interest to a SKABC member since they are beautifully crafted kayaks and in short supply. I would therefore like to post it on your Buy and Sell page, but of course cannot since I am not a member. Is there any way that you or another member could or would post it for me? Much appreciated if the answer is ‘yes’.

    If it makes any difference, I am a current member of the Comox Valley Paddlers, SISKA and and Nanaimo Paddlers.

    I live in Comox now and these are links to the ads that could potentially be posted on your Buy and sell page and/or Facebook page.

    Craigslist: https://comoxvalley.craigslist.org/boa/d/comox-romany-surf-kayak/7642935554.html

    Facebook: https://www.facebook.com/marketplace/item/524999113089169/

    Thank you for considering my request.
    Ian
    __________________
    Ian Guthrie
    778-833-2859
    ianguthrie9@gmail.com

    Helen Yeh

    Hi,

    I am a relatively new member and hoping to paddle tomorrow morning (July 21st) around Rocky Point area but am open to other places launching near Coquitlam (eg. Belcarra, Alouette River). I am ok to paddle from a few hours to the whole day. Feel free to text me at 778-302-4529 if you are by any chance interested. Thanks!

    Helen

Viewing 15 replies - 1,456 through 1,470 (of 4,451 total)