Nick Heath

Forum Replies Created

Viewing 15 replies - 1,186 through 1,200 (of 4,451 total)
  • Author
    Replies
  • Lynda Froese

    We will be paddling in the area next weekend and would love to drop by and say hello at the potluck.

    -Don and Lynda Froese

    in reply to: General Discussion #23831
    Admin S. Jensen

    The club has reserved the group site at Montague Harbour for the Navigation course April 19-21. There are 5 extra spots for members who’d like to come camp and paddle on their own. It is $10 for the two nights. You’d be welcome to join in on the course potluck Saturday pm.

    It’s a chance to camp last minute, socialize, and paddle or explore as you desire. There is no designated leader. Ferry reservations recommended.

    To get a spot, log in to the website and use this link to pay: https://www.skabc.org/events-2/exploring-montague-harbour-galiano-island-2b/

    in reply to: General Discussion #23828
    John Leung

    For those interested, there is a survey for BC Park marine visitor.

    https://helpshapebc.gov.bc.ca/bc-parks-marine-visitor-research

     

    in reply to: General Discussion #23803
    Admin S. Jensen

    Join us at 7:30 pm with SKABC members Benjamin and Katya to screen the film they made of their Antarctic trip. More details are below.  Breakout rooms will be open after the presentation.

    <strong>Here’s a Zoom link:</strong>

    https://us06web.zoom.us/j/86054253245?pwd=3yCWaCZROF4qZjaqf9rpykVvFmb8j4.1
    Meeting ID: 860 5425 3245
    Passcode: 453575

    In February 2022, Katya Yushmanova and Benjamin Walsh took the trip of a lifetime to the Antarctic Peninsula. Crossing the Drake Passage on the sailboat Spirit of Sydney, they spent the next three weeks exploring Antarctica by kayak. An official selection at the 2023 Dana Point Film Festival, Edge of the Human World chronicles their trip and the surreal experience of being in a place where the troubles of the human world seem both distant and strikingly real.

    Benjamin Walsh is a poet and filmmaker based in Vancouver, BC. He never feels more inspired than when he is sitting in a kayak.

    Katya Yushmanova is a painter and a landscape architect based in Vancouver. Her passion for adventure has led her to hike, sail, and kayak much of the Pacific Northwest.

    Ben and Katya have been members of SKABC since 2015.

    Here is a one minute trailer: https://youtu.be/Mkg2GUR7SSM?si=u8iYBz-HRBq0o7bK

    in reply to: April 20-21 – Navigation Course #23800
    Maureen Benzon

    Hi Rebecca,

    I have not heard otherwise. Please look on the training course schedule and register there.

    🙂

    Maureen

    in reply to: April 20-21 – Navigation Course #23799
    Former Member

    Hello

     

    I’m interested in your course. Is the spot still available?

    Rebecca

    in reply to: Buy and Sell #23798
    Former Member

    Wanting to purchase a static tow belt for kayaking.  Please let me know if you have one you want to sell.

    in reply to: General Discussion #23794
    Maureen Benzon

    We have one spot left for the navigation course. Sign up through the training page if you are interested

    in reply to: DIY kayak cart and bike tow bar #23791
    Nick Heath

    Canadian adventurers Colin and Julie Angus travelled many (thousands?) miles towing their rowboats behind mountain bikes in Britain, Europe and as far as Syria. Their boats were similar to enlarged kayaks. Their expedition was self contained, so when they were rowing, their bikes and trailers were usually aboard! It is an interesting book to read. Colin sells his plans both for various boats and a bike trailer, too, I believe.  Bigger wheels/pneumatic tires were a feature. However, the entire trailer was designed to collapse inside a (large) boat hatch, too! – Impressive!

    in reply to: DIY kayak cart and bike tow bar #23781
    Vincent Law

    Hi Jimmy,

    Nice job! Human powered from home to destination! And no more worries of whether there is parking, for how long, parking costs, having someone keep an eye on your gear while you drive off to park, save the time it takes to walk to the car and back… Plus save on the cost of owning a car!

    To improve the cart I would:

    – triangulate the 2 supports and add a cross brace between the two supports.

    – get larger wheels (hard to find). If the wheels are big enough and spaced far enough apart the axle can be right against the boat and you can eliminate the 2 supports.

    – for better bike stability / safety tow from one side of the bike’s rear axle, similar to most kids trailers. The tow bar should ideally run from along the center of the kayak and connect directly to the cart. And the front of the kayak is secured to this bar.

    – add skid guard to the tail of the boat, and a flag for better visibility.

    If I were to tow a kayak I would buy a used (or new) kids trailer w/ wheels spaced wide enough for the kayak to sit between the wheels. Then remove the kids seat and upper frame, have the kayak sit on foam cradles directly on the frame. Extend the tow arm with a metal bar, add a platform w/ foam for the front of the kayak.

    Old folks like me would also add and electric motor to the bike…

    Here are two trailers in good condition. You can get cheaper ones w/ the fabric in poor condition as that will all be removed.

    https://vancouver.craigslist.org/bnc/spo/d/burnaby-mec-bike-trailer/7728524310.html

    This one has aluminum frame (less rust from salt water) adjustable suspension which is a major plus, especially if the kayak is loaded w/ camping gear: https://vancouver.craigslist.org/nvn/bab/d/north-vancouver-thule-chariot-cougar/7732175473.html

    Good luck!

     

    in reply to: General Discussion #23778
    JD

    Put together a PVC cart and tow bar with parts from Home Depot and Rona to cycle my yak to Rocky Point instead of having to use the car. Only ideal for shorter, flatter trips but I would love to be able to take some hills and go a little further (10-15km ea. way).

    Cost less than $150 for all bits with parts to spare.

    Any advice or thoughts on how to improve?

    Video in action.

    PVC cart. 1/2 inch bore axel

    Drilled a hole through the axel and used a hitch pin to fix the wheels

    Purchased a hitch from Amazon for $30CAD that fits a metal post from Home Deopot, which serves as the tow bar (dumb stick).

    Final product:

    in reply to: SOLD- Necky Manitou 13ft with gear – $400 #23758
    Stewart Whitfield

    Hi,

    Thanks for the interest everyone but I have now sold the kayak. Unfortunately struggling to edit the post to say it is sold.

    Regards,

    Stew

     

    in reply to: SOLD- Necky Manitou 13ft with gear – $400 #23757
    Former Member

    Hi Stew. If no one has bought it yet, I would like to. Cheers Brad

    bkeats@shaw.ca

    in reply to: SOLD- Necky Manitou 13ft with gear – $400 #23756
    Stewart Whitfield

    Hi Becky,

    Thanks for the interest. It should be fine for 210lbs. According to the specs I found on line it should be good for 275 -325lbs.  If you would like to chat more about it or to arrange to see it the email me directly on swhi@telus.net   I have some more pictures I can send you to.

    Cheers,

    Stew

     

     

    in reply to: SOLD- Necky Manitou 13ft with gear – $400 #23755
    Former Member

    Hi. Would be interested.  do you think it would hold between 5’3” to 5’10” and up to 210 lbs?

Viewing 15 replies - 1,186 through 1,200 (of 4,451 total)